SL-916D

  • SOLDERING & DESOLDERING IRON STATION
    DESOLDERING GUN TIPS

    SL-916D is solomon's top of the line service center and it will handle virtually all electronic repair and rework applications.
    The SL-916D will simultaneously control temperature either of the two size of soldering iron and desoldering iron and desoldering handle, or control both soldering irons.
    The SL-916D is based on the principle of vacuum absorption of the solder from PC board. Easy desoldering the tin by reversing the vacuum to positive air flow. There is a 2 position switch that shifts the control board from desolder to solder allowing the concurrent operation of 2 irons.
    The suction nozzle and the thermal pipes are exclusively designed for suction of filters even with the soldering tin in fusion and no regular maintenance is required, for optimal performance.
    Easy cleaning Remove the filter by simply turning a knob. The filter tube is made of heat-resistant glass, for a clear view of the suction.
    Combined powerful suction tin gun and high-performance welder for optimal repair works.
    Both the tin suction gun and the welder come with an output voltage of 24V, just to keep the circuit board from being burnt.
  • Voltage 110/120V AC or 220/240V AC
    Power consumption
    (Soldering & Desoldering)
    50W
    Temp.setting range Soldering 150°C~420°C
    300°F~790°F
    Desoldering 210°C~480°C
    410°F~900°F
    Heater Operating Voltage
    (Soldering & Desoldering)
    24V AC
    Size of station L218:W176:H145 (mm)
    Weight 5300g
    Station-Handpiece cord length 115 cm
    AC Power cord 3 pin plug 180cm
    Vacuum pump -500mmHg 24V AC